CHINA NITCHEN EQUIPMENTS GROUP LIMITED
Offering the right machine
Add to Cart
z purlin machine, Z purlin forming machine consists of decoiler, main former and stacker. The whole z purlin machine is controlled by PLC system to achieve fully automatic operation. some main information of the z purlin machine goes as follows:
1 Material: Q235 steel coil
2.Thickness: 2-3mm
3.Coil width max: abt.500mm
4.Inner diameter of the coil minimum: 508mm
5.Outer diameter of the coil maximum: 1600mm
7.Leveller: 5 rollers to level and 2 rollers to convey the material
8.Guiding wheels: 4 wheels (2group) and can be adjusted
9.Horizontal rollers( forming stations): about 14 stations = 14 upper and bottom rollers and the space between the upper and bottom rollers can be ajusted.
10.Material of the roller: GCr 15, HRC58-62
11.the structure of the main body: separate steel structure with the surface properly painted.
12.Power of the main motor: 11KW3phases, 380V, 60Hz
13.Reducer: Pin cycloide
14.Driving system: Chain transmission
15.Adjusting device: 2 horizontal and 2 longitudinal rollers
16.Cutting: Hydraulic cutting. Stop to cut.
17.Power of the hydraulic motor: 7.5KW
18.Length control: encoder
19.Controlling system: PLC programmable control with many groups of operations on the screen.
20.Forming speed max: 12m/min
21.Run out table: consisting of rollers and frame, length to your requirements.
26.Weight of the main body: about 14.5T
25.Dimension and Layout Main Machine: 13m*1.8m*1.5m